SoftPlus Water Softeners Iron Rival Iron Reduction Systems ecoTAC Hard Water Conditioning Systems

5 Micron Pleated Polypropylene Sediment Cartridge for Watts Big Bubba®
Model #: BBC-150-P5 / PWWJCP5

Watts Big Bubba 5 Micron Pleated Polypropylene Cartridge - #PWWJCP5

MSRP: US$267.50
Our Price: US$222.92
You save: $44.58

- or -
Make us an offer for the Watts Big Bubba 5 Micron Pleated Polypropylene Cartridge -  #PWWJCP5

Write a review.

Found a Lower Price?
Request a Price Beat
Free Shipping on 5 Micron Pleated Polypropylene Cartridge -  #PWWJCP5

Special Order Item.
Please contact us for lead time.

Watts Big Bubba 5 Micron Pleated Polypropylene Cartridge -  #PWWJCP5

  • Description
  • Specifications
  • Related Products
  • Installation / Manual
  • Reviews
  • FAQ

We are pleased to offer a complete selection of replacement cartridges for the Watts Big Bubba high flow housing. Watts Big Bubba pleated polypropylene sediment cartridges are ideal for more critical applications, offering greater efficiency, more surface area for greater throughput and reduced cost for whole house sediment filtration. PPWWJCP1 pleated polypropylene cartridges fit in Watts Big Bubba Filter Cartridge Housing.


  • Dual O-rings for superior sealing
  • 5 Micron filtration rating
  • Reduces extra-fine dirt, sand, sediment, silt, rust particles, scale particles
  • Greater efficiency with more surface area

#PPWWJCP1 Pleated Polypropylene Sediment Cartridge Specifications

Technical Specifications
Part ##PWWJCP5
Model ##BBC-150-P5
Order #7100304
MediaPleated Polypropylene
End capsPP + FG
Center tubesPoly Propylene
Maximum flow rate (GPM) 150
Maximum temperature 125°F (52°C)
Maximum°ΔP (psi) 30
Chemical resistanceExcellent
Length (media)26-1/4"
O-rings (dual)EPDM
Shipping weight (lbs.)5
Carton dimensions7" x 7" x 31"
Micron rating5
Note: Flow rates are based on each specific application, micron rating, solids content and a number of other factors. End user should consider these factors when selecting the filter housing (or number of filter housings) needed for their particular requirement.

Watts Big Bubba Housing

Watts Big Bubba Housing <br>Part#:BBH-150-NP<br><br>

MSRP: US$1,365.52
Our Price: US$1,137.94
You save: $227.58

- More Info -

Watts Big Bubba Carbon Cartridge
Model#: BBC-150-ACP

Watts Big Bubba Carbon Cartridge<br>Model#: BBC-150-ACP<br>Part#: PWWJCAC5<br><br>

MSRP: US$480.83
Our Price: US$400.69
You save: $80.14

- More Info -

Watts Big Bubba Carbon Block Cartridge
Model#: BB-C100

Watts Big Bubba Carbon Block Cartridge<br>Model#: BB-C100<br><br>

MSRP: US$747.92
Our Price: US$623.26
You save: $124.66

- More Info -

How to install a Watts Jumbo Big Bubba cartridge

  1. Close inlet valve.
  2. Close outlet valve.
  3. Open valve on drain, if a drainpipe has been installed.
  4. Press pressure relief button to relieve pressure.
  5. Remove lid after pressure has been relieved.
  6. Rotate cartridge counterclockwise and pull upward. Remove the cartridge.
  7. Install new cartridge. Push downward and rotate clockwise to engage locking tabs lubricating O-rings if necessary.
  8. Check lid O-ring to ensure it is properly seated. Lubricate if necessary.
  9. Replace lid.
  10. Replace eyebolts and tighten. (Hand tight is sufficient.)
  11. Close valve on drain if a drainpipe was installed.
  12. Open outlet pipe completely.
  13. Open inlet pipe slowly to check for leaks.
  14. Vent filter to dispel air by depressing pressure relief button. Be careful when relieving pressure

Watts Big Bubba 5 Micron Pleated Polypropylene Cartridge - #PWWJCP5 Reviews

There are currently no reviews for this product.
Be the first to write a review.

Watts Big Bubba 5 Micron Pleated Polypropylene Cartridge - #PWWJCP5 Customer Questions & Answers

No customer questions have been submitted for this. Have a question? Ask it above.