Pentek ST-3 30" Inch Stainless Steel Housing - #156019-02
Pentek Pentek ST-3 30 Inch
The Pentek Pentek ST-3 30 Inch
Stainless Steel Housing - #156019-02 has been discontinued by the manufacturer.
Part #: 156019-02
The Pentek ST-3 stainless steel filter housing provides heavy duty filtration for smaller filtration systems and point-of-use applications. Supplying flow rates of up to 30 gpm (76 Lpm) at a maximum water temperature of 300F (149C), the ST-3 housing is ideal for hot water and high-pressure applications that are not appropriate for plastic housings.
The brushed 304 stainless steel sump is available with either a pipe plug or petcock in the bottom for draining. Heads are manufactured from nickel-plated cast-brass. ST Series Housings are easy to install and maintain. They are compatible with a wide range of filter cartridges, adding to their versatility.
Uses standard 30" long filter cartridges.
- brushed 304 stainless steel sump
- nickel-plated brass head
- rated to a maximum pressure of 250 PSI (17.2 bar)
- rated to a maximum water temperature of 300F (149C)
NOTE: Maximum cartridge diameter is 3" (76 mm). Will not accept GAC, CC, CGAC, TSGAC, WS, PCF or PCC Series cartridges. Not recommended for applications with TDS or chlorides >1000 ppm and/or pH <5.0. Use of this product in these conditions will void the warranty.
|Features & Specifications:|
|Sump Material:||brushed 304 stainless steel|
|Head Material:||nickel-plated brass|
|Inlet / Outlet:||3/4" FNPT|
|Temperature Rating:||40-300F (4.4-149C)|
|Pressure Rating:||250 psi (17.2 bar)|
|Dimensions:||32.38" x 4.13" (823 x 105 mm)|
|Flow Rate:||20 gpm (76 Lpm)|
|Gasket / O-Ring:||part #143216|