SoftPlus Water Softeners Iron Rival Iron Reduction Systems ecoTAC Hard Water Conditioning Systems

Pentek ST-2 20" Inch Stainless Steel Housing - #156018-02

Pentek Pentek ST-2 20 Inch <br>Stainless Steel Housing - #156018-02

Pentek Pentek ST-2 20 Inch
Stainless Steel Housing - #156018-02

MSRP: US$478.36
Our Price: US$474.77
You save: $3.59

Write a review.

Found a Lower Price?
Request a Price Beat
Free Shipping on Pentek ST-2 20 Inch <br>Stainless Steel Housing - #156018-02
Lowest Price Guaranteed on the Pentek Pentek ST-2 20 Inch <br>Stainless Steel Housing - #156018-02

Lowest Price Guaranteed!

If you find a lower price on this product call us or Click here to request a price beat.

Part #: 156018-02

The Pentek ST-2 stainless steel filter housing provides heavy duty filtration for smaller filtration systems and point-of-use applications. Supplying flow rates of up to 15 gpm (57 Lpm) at a maximum water temperature of 300F (149C), the ST-2 housing is ideal for hot water and high-pressure applications that are not appropriate for plastic housings.

The brushed 304 stainless steel sump is available with either a pipe plug or petcock in the bottom for draining. Heads are manufactured from nickel-plated cast-brass. ST Series Housings are easy to install and maintain. They are compatible with a wide range of filter cartridges, adding to their versatility.

Uses standard 20" long filter cartridges.

  • brushed 304 stainless steel sump
  • nickel-plated brass head
  • rated to a maximum pressure of 250 PSI (17.2 bar)
  • rated to a maximum water temperature of 300F (149C)

NOTE: Maximum cartridge diameter is 3" (76 mm). Will not accept GAC, CC, CGAC, TSGAC, WS, PCF or PCC Series cartridges. Not recommended for applications with TDS or chlorides >1000 ppm and/or pH <5.0. Use of this product in these conditions will void the warranty.

Features & Specifications:
Sump Material:brushed 304 stainless steel
Head Material:nickel-plated brass
Inlet / Outlet:3/4" FNPT
Temperature Rating:40-300F (4.4-149C)
Pressure Rating:250 psi (17.2 bar)
Dimensions:22.75" x 4.13" (578 x 105 mm)
Flow Rate:15 gpm (57 Lpm)
Gasket / O-Ring:part #143216

Other Pentek ST Series Stainless Steel Housing Options:
Pentek ST-1 10" Stainless Steel Housing
Pentek ST-3 30" Stainless Steel Housing

Options, Accessories and Replacement Parts: