Viqua QL-410 Lamp & Sleeve Combo

Viqua QL-410 - Lamp & Sleeve Combo

MSRP: US$168
Our Price: US$145.00
You save: $23.00

- or -
Make us an offer for the Viqua QL-410 - Lamp & Sleeve Combo

(0 Reviews)
Be the first to write a review.

Found a Lower Price?
Request a Price Beat
Free Shipping on QL-410 - Lamp & Sleeve Combo

Lowest Price Guaranteed on the Viqua QL-410 - Lamp & Sleeve Combo

Guaranteed Genuine Viqua QL-410 Lamp & Sleeve Combo. Don't be Fooled by Knock-Offs!

Viqua QL-410 - Lamp & Sleeve Combo

  • Description
  • Specifications
  • Related Products
  • Installation / Manual
  • Reviews
  • Why Genuine

We are pleased to offer a complete selection of replacement lamps & sleeves for all Viqua / Sterilight ultraviolet (UV) sterilizers.

The Sterilight QL-410 replacement lamp/sleeve combo is designed only for use in certain UV sterilizers manufactured by Viqua (formerly R-Can), including the very popular VH410, VH410M, and VH410-F20. Viqua manufacturers several UV sterilizers on an OEM basis for other companies. This lamp/sleeve combo is also the OEM replacement for the Pelican™ PUV-14 and Aquasana™ AQ-UV-HIFLOW and SC410-A, and A.O. Smith™ AO-WH-UV.

Sterilight QL-410 is the replacement lamp & sleeve combo for the following models:

Sterilight QL-410 Specifications

Technical Specifications
Part # #QL-410
Lamp Viqua S410RL-HO
Sleeve Viqua QSO-410
Lamp Power 45 Watts
Lamp Life 12 Months

Replacement Sleeve
Part#: QSO-410

Replacement Sleeve <br>Part#: QSO-410

MSRP: US$72.00
Our Price: US$59.00
You save: $13.00

- More Info -

Replacement Lamp
Part#: S410RL-HO

Replacement Lamp <br>Part#: S410RL-HO

MSRP: US$135.00
Our Price: US$115.00
You save: $20.00

- More Info -

How to change a Sterilight S410RL-HO Lamp

  1. Turn off water supply valve to UV sterilizer
  2. Turn on faucet elsewhere in the home to depressurize the system
  3. Disconnect your UV system from power (unplug unit)
  4. Allow system to cool for 5 - 10 minutes
  5. Put on clean gloves
  6. Squeeze tabs on lamp connector and lift straight up
  7. Disconnect lamp connector from Sterilight S410RL-HO lamp
  8. Remove Sterilight S410RL-HO lamp from system
  9. Insert new Sterilight S410RL-HO lamp into the system
  10. Line up longest pin on lamp to shortest pin on lamp connector
  11. Once the Sterilight S410RL-HO lamp and lamp connector are attached slide assembly down towards chamber until you hear a click & it is attached
  12. Hold down reset button on side of power supply to reset day counter & plug in UV system
  13. Screen will display RSET
  14. Slowly open water supply valve to UV sterilizer
  15. Check for leaks
  16. Close faucet elsewhere in the home
Note: The Sterilight Sterilight S410RL-HO is a fluorescent lamp and can be recycled at most hardware stores or your local hazardous waste facility.

Viqua QL-410 - Lamp & Sleeve Combo Reviews

There are currently no reviews for this product.
Be the first to write a review.
It is critical that only genuine Viqua brand original equipment lamps be used in your system. It has come to our attention that a number of Chinese manufacturers are making knock-off replica UV lamps. While they may physically fit in a Viqua system, they are NOT compatible. Testing of a wide range of these lamps has shown that many do not provide a safe UV dose or offer protection for the stated lamp life, and in some cases have even caused the failure of the ballast/controller and melting of the lamp harness.

* "Pelican™" is a trademark of, An Enviro Water Solutions, Inc. Company
** "Aquasana™" is a trademark of Aquasana, Inc.
** "A.O. Smith™" is a trademark of A.O. Smith Corporation