Pentek ELPC-10 Water Filter (#255668-43)

Alternate Part Numbers: 25566843

Pentek ELPC-10 - Case of 30

MSRP: USD$767.52
Our Price: USD$450.95
($15.03 per filter)
You Save: $316.57

Write a review.

Bulk Quantity Discounts Available,
Please call 1-866-376-2690 for Quote

City Water

Well Water

Recommended for the treatment/removal of:

Sediment, Dirt, Rust Particles, Chlorine

Description
In Series Filters
Alternative Filters
Reviews
FAQ

Description, Features & Benefits

Specifications:
Manufacturer/Brand:	Pentek
Filter Series:	ELPC
Part Number:	255668-43
Alternate Part Number(s):	25566843
Type:	Carbon - Carbon Block
Material(s):	Powdered Activated Carbon in Synthetic Fiber Matri...
Size:	2 7/8 x 9 3/4 Inches (73 x 248mm)
Micron Rating:	7 (Nominal)
Pressure Loss:	3.4 psi @ 1 GPM
Validation:
Specifications Sheet:	Pentek ELPC Series Specs

The ELPC-10 is a premium line of activated carbon filter cartridges specifically designed for electroplating solutions. They represent the best technology available in cartridge filtration for use in a wide range of electroplating applications.

The unique technology used to manufacture this product ensures that there is no bleeding of carbon fines into the plating bath. In addition, the carbon that is used is an ulra-clean, highly purified carbon to ensure that sulfur is not leached into the plating bath.

ELPC-10 products have a 10-micron nominal rating with superior dirt-holding ability.

The fibrous physical structure created by our proprietary Fibredyne technology produces a unique block with true depth filtration capability which allows for maximum treatment with minimal pressure drop through the cartridge.

Cellulose-free construction
Resistant to chemical breakdown in both acidic and alkaline solutions up to 180 degrees F (82C)
Will not contribute to plating porosity or brittleness
Integrated post-filtration layer to ensure that no carbon fines are bled into the plating bath
End cap gaskets are permanently molded on to the end caps to ease filter cartridge change-out (gaskets cannot fall off into the filter housing during installation or removal of filter)