Trojan UVMax Model Pro 10 Power Supply / Controller / Ballast (#650709-003)
Trojan UVMax Model Pro 10
Our Price: US$1,040.00
You save: $185.00
Be the first to write a review.
Found a Lower Price?
Request a Price Beat
Lowest Price Guaranteed!If you find a lower price on this product call us or Click here to request a price beat.
Part Number: 650709-003
This is the genuine original equipment replacement UV power supply / controller / ballast for NSF-Validated Trojan UVMax Model Pro 10 UV sterilizers manufactured between 2008 and present. If your system was manufactured prior to 2008, click here. Systems manufactured prior to 2008 require a different controller, part # 650629-010.
This ballast is compatible with Viqua's true flow-based dose monitoring technology and features its innovative LightWise technology which reduces lamp intensity during periods without water flow. This reduces mineral scale formation on the UV sleeve, reduces water heating, and saves energy. These features require a Viqua flow meter. If your system does not have a Viqua flow meter, this ballast will still do everything that your current ballast does. Flow meters are available as an upgrade if you don't have one, please call us toll free at 1-866-376-2690 for details. These 2 new features are very much worth the upgrade.
Voltage: 100-240 volts
Weight: 3.6 KG (8 LB)
Power cord sold separately - do not discard your power cord with your old ballast!
We only sell genuine UVMax brand replacement parts from Viqua. The use of non-original equipment with your UV system could void your warranty and/or result in system damage, pre-mature lamp failure, loss of equipment validation, inadequate water disinfection, and even hazardous electrical shorts. Don't settle for anything less than genuine UVMax parts for your system. Beware of knock-offs!