Water-Right CT-1005-IO, AO Smith CT-1005-IO, & Purus CT-1005-IO Pleated Sediment Filter - 5 Micron
dual gradient, double pleated 5 micron filter for Water-Right Cartridge Tank systems
Water-Right CT-1005-IO ONE Cartridge | List Price: US$ Our Price: US$279.00 You save: $179.00 Write a review. Found a Lower Price? Request a Price Beat |
 Lowest Price Guaranteed!If you find a lower price on this product call us or Click here to request a price beat. |
Note: Not compatible with Enpress CT-10x5, Nelsen CT-10x5
- Description
- Correct Filter?
- Specifications
- Reviews
- FAQ
|
The CT-1005-IO is a dual gradient double pleated filter designed for extended life and use, with a filtration level of 5 microns (nominal). Like other Orange Series cartridges, this filter features two distinct pleated layers, a 10 micron outer layer and a 5 micron inner layer. This structure, combined with a surface area of approximately 100 square feet, provides a greatly improved service life while achieving high flow rates with low pressure drop. The CT-1005-IO is recommended for flow rates up to 50 GPM. See the pressure drop vs. flow rate chart for expected pressure loss at various flow rates.
Features and Benefits:
- Dual gradient, double pleated filters for improved service life, contaminant removal, and dirt holding capacity
- Huge surface area to promote high flow rates, low pressure loss, and reduced cartridge replacement frequency
- Double Buna-N o-ring seals to ensure no bypass of contaminants and high chemical compatibility
- Durable polyester filter and polypropylene cap construction for superior bacteria and chemical resistance
Multiple manufacturers produce products with the same or similar names and model numbers and while they share some information they do not fit.
This filter fits the following brands:
- Water-Right ONE
- AO Smith ONE
- Purus ONE
Water-Right CT-1005-IO, AO Smith CT-1005-IO, & Purus CT-1005-IO Filter Specifications
| Specifications | |
|---|---|
| Filter Type: | Dual-Gradient, Pleated |
| Micron Rating: | 10 Micron Outer / 5 Micron Inner |
| Max. Recommended Flow Rate: | 50 GPM (189 LPM) |
| Filter Material: | Polyester |
| End Cap Material: | Polypropylene |
| O-Ring Material: | Buna-N |
| Max Pressure (Feed): | 150 psi (<90 psi recommended) |
| Surface Area: | Approx. 100 Sq. Ft. |
Water-Right CT-1005-IO ONE Cartridge Pleated, Dual Gradient 10/5 Micron Orange Series Reviews
There are currently no reviews for this product.
Be the first to write a review.
