USD / CAD
CART
1-866-376-2690

Viqua Lamp & Sleeve Combo Kit for UVMax Models G, G+ & Pro 10 - #602850-101

Viqua UVMax Lamp & Sleeve Combo for
Models G, G+ & Pro 10 - #602850-101

MSRP: US$275.00
Our Price: US$235.00
You save: $40.00



- or -
Make us an offer for the Viqua UVMax Lamp & Sleeve Combo for<br>Models G, G+ & Pro 10 - #602850-101

(0 Reviews)
Be the first to write a review.


Found a Lower Price?
Request a Price Beat
Free Shipping on Lamp & Sleeve Combo for<br>Models G, G+ & Pro 10 - #602850-101

Lowest Price Guaranteed on the Viqua UVMax Lamp & Sleeve Combo for<br>Models G, G+ & Pro 10 - #602850-101

Guaranteed Genuine Viqua UVMax #602850-101 Lamp & Sleeve Combo. Don't be Fooled by Knock-Offs!

Viqua UVMax Lamp & Sleeve Combo for<br>Models G, G+ & Pro 10 - #602850-101

  • Description
  • Specifications
  • Related Products
  • Installation / Manual
  • Reviews
  • Why Genuine

We are pleased to offer a complete selection of replacement lamps & sleeves for all Viqua / Sterilight ultraviolet (UV) sterilizers. Viqua / Sterilight replacement lamp & sleeve combo kits are designed only for use in Viqua / Sterilight UV sterilizers.

Trojan UVMax #602850-101 is the replacement lamp & sleeve combo for the following models:

Trojan UVMax #602850-101 Specifications

Technical Specifications
Part # #602850-101
Lamp Viqua(Trojan) UVMax #602854
Sleeve Viqua(Trojan) UVMax #602974
Lamp Length 18" (46cm)
Lamp Power 100 Watts
Lamp Life 24 Months
GTIN 00773058101080

Replacement Sleeve
Part#:602974

Replacement Sleeve <br>Part#:602974

MSRP: US$75.00
Our Price: US$65.00
You save: $10


- More Info -

Replacement Lamp
Part#:602854

Replacement Lamp <br>Part#:602854

MSRP: US$255.00
Our Price: US$215.00
You save: $40


- More Info -

How to change a UVMax #602854 Lamp

  1. Turn off water supply valve to UV sterilizer
  2. Turn on faucet elsewhere in the home to depressurize the system
  3. Disconnect your UV system from power (unplug unit)
  4. Allow system to cool for 5 - 10 minutes
  5. Put on clean gloves
  6. Remove dust cover by squeezing and lifting up
  7. Lift lamp connector straight up
  8. Remove UVMax #602854 lamp from system by unscrewing and lifting straight up
  9. Insert new UVMax #602854 lamp into the system
  10. Screw new UVMax #602854 lamp into the system
  11. Push lamp connector down onto chamber
  12. Attach dust cover and slide over top of chamber
  13. Plug in UV system
  14. System will beep
  15. Hold reset button until system beeps and counter is reset to 365
  16. Slowly open water supply valve to UV sterilizer
  17. Check for leaks
  18. Close faucet elsewhere in the home
Note: The UVMax UVMax #602854 is a fluorescent lamp and can be recycled at most hardware stores or your local hazardous waste facility.

Viqua UVMax Lamp & Sleeve Combo for
Models G, G+ & Pro 10 - #602850-101 Reviews



There are currently no reviews for this product.
Be the first to write a review.
It is critical that only genuine Viqua brand original equipment lamps be used in your system. It has come to our attention that a number of Chinese manufacturers are making knock-off replica UV lamps. While they may physically fit in a Viqua system, they are NOT compatible. Testing of a wide range of these lamps has shown that many do not provide a safe UV dose or offer protection for the stated lamp life, and in some cases have even caused the failure of the ballast/controller and melting of the lamp harness.