Sterilight S287RL Lamp

Sterilight S287RL Lamp

MSRP: US$93.00
You save: $14.00!!

Choose Option:

(In Stock)
Lowest Price Guaranteed on the Sterilight S287RL Lamp Make us an offer for the Sterilight S287RL Lamp         Free Shipping on S287RL Lamp

(0 Reviews)
Be the first to write a review.

Found a Lower Price? We price match comparable systems!
Request a Price Beat

Guaranteed Genuine Sterilight S287RL Original Equipment Lamp. Don't be Fooled by Knock-Offs!

Sterilight S287RL Lamp

  • Description
  • Specifications
  • Related Products
  • Installation / Manual
  • Reviews
  • Why Genuine

We are pleased to offer a complete selection of replacement lamps for all Sterilight ultraviolet (UV) sterilizers.

Sterilight S287RL replacement lamps are designed only for use in Sterilight UV sterilizers. We do not recommend that you attempt to use Sterilight replacement lamps in models made by other manufacturers.

Sterilight S287RL is the replacement lamp for the following models:

  • Sterilight SC2.5
  • Sterilight S1Q-PA
  • Sterilight SSM-14

Sterilight S287RL Specifications

Technical Specifications
Part # S287RL - 8400901
Max Flow 2.0 gpm
Lamp Power 14 Watts
Lamp Life 12 Months
GTIN 00773058027755

Replacement Sleeve

Replacement Sleeve <br>Part#:QS-287D

MSRP: US$55.00
Our Price: US$45.00
You save: $10.00

- More Info -

Replacement Sleeve

Replacement Sleeve <br>Part#:QS-001

MSRP: US$42.00
Our Price: US$35.00
You save: $7.00

- More Info -

Replacement Lamp/Sleeve Combo

Replacement Lamp/Sleeve Combo<br>Part#:S287-QL

MSRP: US$118.00
Our Price: US$99.00
You save: $19.00

- More Info -

How to change a Sterilight S287RL Lamp

  1. Turn off water supply valve to UV sterilizer
  2. Turn on faucet elsewhere in the home to depressurize the system
  3. Disconnect your UV system from power (unplug unit)
  4. Allow system to cool for 5 - 10 minutes
  5. Put on clean gloves
  6. Squeeze tabs on lamp connector and lift straight up
  7. Disconnect lamp connector from Sterilight S287RL lamp
  8. Remove Sterilight S287RL lamp from system
  9. Insert new Sterilight S287RL lamp into the system
  10. Line up longest pin on lamp to shortest pin on lamp connector
  11. Once the Sterilight S287RL lamp and lamp connector are attached slide assembly down towards chamber until you hear a click & it is attached
  12. Hold down reset button on side of power supply to reset day counter & plug in UV system
  13. Screen will display RSET
  14. Slowly open water supply valve to UV sterilizer
  15. Check for leaks
  16. Close faucet elsewhere in the home
Note: The Sterilight Sterilight S287RL is a fluorescent lamp and can be recycled at most hardware stores or your local hazardous waste facility.

Sterilight S287RL Lamp Reviews

There are currently no reviews for this product.
Be the first to write a review.
It is critical that only genuine Viqua brand original equipment lamps be used in your system. It has come to our attention that a number of Chinese manufacturers are making knock-off replica UV lamps. While they may physically fit in a Viqua system, they are NOT compatible. Testing of a wide range of these lamps has shown that many do not provide a safe UV dose or offer protection for the stated lamp life, and in some cases have even caused the failure of the ballast/controller and melting of the lamp harness.