Sterilight S212RL Lamp
- Related Products
- Installation / Manual
- Why Genuine
We are pleased to offer a complete selection of replacement lamps for all Sterilight ultraviolet (UV) sterilizers.
Sterilight S212RL replacement lamps are designed only for use in Sterilight UV sterilizers. We do not recommend that you attempt to use Sterilight replacement lamps in models made by other manufacturers.
Sterilight S212RL is the replacement lamp for the following models:
Sterilight S212RL Specifications
|Part #||S212RL - 8400900|
|Max Flow||1.1 gpm|
|Lamp Power||10 Watts|
|Lamp Life||12 Months|
How to change a Sterilight S212RL Lamp
- Turn off water supply valve to UV sterilizer
- Turn on faucet elsewhere in the home to depressurize the system
- Disconnect your UV system from power (unplug unit)
- Allow system to cool for 5 - 10 minutes
- Put on clean gloves
- Squeeze tabs on lamp connector and lift straight up
- Disconnect lamp connector from Sterilight S212RL lamp
- Remove Sterilight S212RL lamp from system
- Insert new Sterilight S212RL lamp into the system
- Line up longest pin on lamp to shortest pin on lamp connector
- Once the Sterilight S212RL lamp and lamp connector are attached slide assembly down towards chamber until you hear a click & it is attached
- Hold down reset button on side of power supply to reset day counter & plug in UV system
- Screen will display RSET
- Slowly open water supply valve to UV sterilizer
- Check for leaks
- Close faucet elsewhere in the home
Sterilight S212RL Lamp Reviews
There are currently no reviews for this product.
Be the first to write a review.