Pelican™ Lamp & Sleeve Combo Kit for PUV-16 Series - #PUV-16-LampSleeve
Pelican™ PUV-16-LampSleeve (#602810-103)
Our Price: US$200.00
You save: $35.00
Found a Lower Price?
Request a Price Beat
Lowest Price Guaranteed!If you find a lower price on this product call us or Click here to request a price beat.
Original Viqua OEM Lamp & Sleeve for Pelican™ PUV-16. Viqua manufactures Pelican™ UV's for Pelican™.
- Related Products
- Installation / Manual
- Why Genuine
We are pleased to offer a complete selection of replacement lamps & sleeves for all Pelican ultraviolet (UV) sterilizers.
The Pelican™ PUV-16-LampSleeve replacement lamp & sleeve combo is designed only for use in certain UV sterilizers manufactured by Viqua as listed below. Viqua manufacturers several UV sterilizers on an OEM basis for other companies. This lamp/sleeve combo is also the OEM replacement for the Pelican™ PUV-16.
Pelican PUV-16-LampSleeve is the replacement lamp & sleeve combo for the following models:
Pelican PUV-16-LampSleeve Specifications
|Part #||PUV-16-LampSleeve (#602810-103)|
|Lamp Length||25.5" (65cm)|
|Lamp Power||67 Watts|
|Lamp Life||12 Months|
How to change a Pelican™ PUV-16-Lamp
- Turn off water supply valve to UV sterilizer
- Turn on faucet elsewhere in the home to depressurize the system
- Disconnect your UV system from power (unplug unit)
- Allow system to cool for 5 - 10 minutes
- Put on clean gloves
- Remove dust cover by squeezing and lifting up
- Lift lamp connector straight up
- Remove Pelican™ PUV-16-Lamp from system by unscrewing and lifting straight up
- Insert new Pelican™ PUV-16-Lamp into the system
- Screw new Pelican™ PUV-16-Lamp into the system
- Push lamp connector down onto chamber
- Attach dust cover and slide over top of chamber
- Plug in UV system
- System will beep
- Hold reset button until system beeps and counter is reset to 365
- Slowly open water supply valve to UV sterilizer
- Check for leaks
- Close faucet elsewhere in the home
Pelican™ PUV-16-LampSleeve (#602810-103) Reviews
Excellent Customer Service
Customer Service beyond expectations. This company has your back and they care. I am not just talking about service when everything goes smoothly.... I am talking about when things go sideways. The customer service team went over the top to even discover that I was having a challenge ...and then they made it their problem to solve. I will buy from this company every time. I have no hesitation in recommending this company to my friends and relatives - something, like this review, I rarely have the privilege of doing - Brian
Installed easily, works great. Wonderful customer service, product arrived quickly, and I really appreciate getting a loyalty discount each year when I order. Thank You - BJ Hart
Pelican™ PUV-16-LampSleeve (#602810-103) Customer Questions & Answers
It is critical that only genuine Viqua manufactured original equipment lamps & sleeves be used in your Pelican™ system. It has come to our attention that a number of Chinese manufacturers are making knock-off replica UV lamps and sleeves. While they may physically fit in a Viqua / Pelican system, they are NOT compatible. Testing of a wide range of these lamps has shown that many do not provide a safe UV dose or offer protection for the stated lamp life, and in some cases have even caused the failure of the ballast/controller and melting of the lamp harness.