SoftPlus Water Softeners Iron Rival Iron Reduction Systems ecoTAC Hard Water Conditioning Systems

Enpress CT-COMM150 Pleated Polypropylene
Commercial Sediment Filter - 150 Microns

150 micron pleated polypropylene commercial sediment filter for Enpress ONE Cartridge Tank systems

Enpress CT-COMM150 Cartridge
Pleated Polypropylene, 150 Microns
Red Series

MSRP: US$300.00
Our Price: US$216.00
You save: $84.00

Write a review.

Found a Lower Price?
Request a Price Beat
Free Shipping on CT-COMM150 Cartridge <br>Pleated Polypropylene, 150 Microns<br> Red Series
Lowest Price Guaranteed on the Enpress CT-COMM150 Cartridge <br>Pleated Polypropylene, 150 Microns<br> Red Series

Lowest Price Guaranteed!

If you find a lower price on this product call us or Click here to request a price beat.

Alternative Part Numbers:

Enpress CT-COMM150
Nelsen CT-COM150P

Note: Not compatible with Water-Right CT-COMM150-IO

Enpress CT-COMM150 Cartridge <br>Pleated Polypropylene, 150 Microns<br> Red Series

Enpress One Red Series

The CT-COMM150 is a 150 micron pleated polypropylene commercial sediment filter designed for extended service life and high flow rates. The CT-COMM150 is acceptable for flow rates up to 150 GPM. See the pressure drop vs. flow rate chart for expected pressure loss at various flow rates.

The CT-COMM150 will outperform competitive filtration solutions in all turbidity applications including silt, rust, and other soft particle filtration. The Red Series also provides lower shear water velocity as the raw water passes through the filter, allowing for more contact time and interaction with the extensive surface area of the filters. This results in higher water quality and longer life of the filtration system.

Each filter comes with top cap with built-in handle for lightweight and easy removal, a bag for proper sanitary disposal, and a double o-ring bottom seal to prevent filter bypass.

All components and materials are manufactured from NSF 61 and FDA certified materials.

The Enpress CT-COMM150 cartridge is designed specifically for Enpress ONE Cartridge Tank filter systems with 2 inch inlet/outlet. The Enpress ONE Cartridge Tank is marketed under a variety of other brand names and part numbers, including: Watts SCT-200; Hellenbrand 109711, and Nelsen NFS-HF-PLUS. This cartridge is compatible with all of these systems that have a 2 inch inlet/outlet.

Features and Benefits:

  • Improved service life, contaminant removal, and dirt holding capacity
  • Large surface area to promote high flow rates, low pressure loss, and reduced cartridge replacement frequency
  • Double EPDM o-ring seals to ensure no bypass of contaminants and high chemical compatibility
  • Durable polypropylene construction for superior bacteria and chemical resistance
  • Belly filter bands to prevent filter collapse under high flow rates and heavy contaminant loading
Filter Type: Pleated Sediment Filter
Micron Rating: 150 Microns (Nominal)
Max. Recommended Flow Rate: 150 GPM (568 LPM)
Filter Material: Polypropylene
End Cap Material: Polypropylene
O-Ring Material: EPDM
Max Pressure (Feed): 150 psi (<90 psi recommended)
Max. Pressure Differential: 40 psi