Aqua Flo 475QC-3 3 Stage Quick-Change Filter System
w/ Ultrafiltration (#475QC-3)

Description, Features & Benefits

The Aqua Flo 475QC-3 quick change 3 stage ultra filtration system has an innovative design for ultimate ease of operation. It reduces lead, VOC (pesticides, herbicides, chemicals), THM, chlorine, taste, odor & sediment as small as 0.2 microns. Filter replacement can be done in literally a couple of minutes without any tools and wihout even turning the water supply off! Just a quick quarter turn to remove the old filter, and a quarter twist to lock in the new cartridge. It doesn't get any easier!

Specifications & Operating Conditions - Aqua Flo 3 Stage UF System

Stages and Specifications
Stage 1: Sediment Pre-Filter	Aqua Flo Blue (#65010086) 5 Micron Sediment Filter Replace every 3 - 6 months - Traps silt/dust, rust and sand which may affect the taste and look of your water, while at the same time protecting the other filters from premature fouling.
Stage 2: Carbon Pre-Filter	Aqua Flo Purple (#65010088) 10 Micron Coconut Carbon Cartridge Replace every 3 - 6 months - Reduces chlorine, organochlorine compounds, chlorination disinfection byproducts (THMs and HAs), many VOCs and more.
Stage 3: Ultra Filtration Membrane	Aqua Flo Black (#65010093) Ultra Filtration Membrane

This system is designed for use on all chlorinated and non-chlorinated potable water supplies. It is an excellent choice for most homes. If you do not receive your water from a municipal water system (you get your water from a well, lake or other non-treated source), you should have your water tested to ensure it is biologically safe (free of bacteria, viruses, and other harmful microorganisms) before using a reverse osmosis filter as your only water treatment. If your water is biologically contaminated, you should consider a point-of-use or whole-house ultraviolet purifier in addition to your reverse osmosis unit to kill any remaining microorganisms.

Recommended Source Water Parameters:

Iron (Fe): < 0.2 ppm (mg/L)
Manganese (MN): < 0.05 ppm
Hydrogen Sulfide: 0.0 ppm
Turbidity: < 1.0 NTU
Pressure: 40-100 PSI
Temperature: 40-100F (4-38C)
pH Range: 3-11

Note: The contaminants or other substances removed or reduced by this water treatment device are not necessarily present in your water.

Replacement Parts and Popular Accessories

Aqua Flo 3 Stage Ultrafilter Installation, Manuals & Resources

The ultra filtration system mounts under your sink, out of sight. Water supply is gained by attaching a simple adapter to your cold water supply pipe (copper or plastic). You will have to drill a hole in your countertop or sink frame to attach the faucet. It is a relatively easy do-it-yourself project, or if you prefer, you can have it installed by a handyman or plumber. The unit includes all installation hardware and a complete installation guide.
Aqua Flo 475QC-3 Ultra Filter Installation
and Owners Manual

Aqua Flo 475QC-3 3 Stage Quick-Change Filter w/ Ultrafiltration (#475QC-3) Reviews

There are currently no reviews for this product.
Be the first to write a review.

Aqua Flo 475QC-3 3 Stage Quick-Change Filter w/ Ultrafiltration (#475QC-3) Customer Questions & Answers

Question:	Does the Aqua Flo 475QC-3 reduce or eliminate fluoride?
Answer(s):	No, this system is not designed to remove fluoride. If you are looking for a system that will remove fluoride, I would recommend a reverse osmosis system like the Aqua Flo 475QC-4. By HomePlus Water on Feb 29, 2024

Question:	Does the Aqua Flo 475QC-3 reduce or eliminate fluoride?
Answer(s):	The Aqua Flo 475QC-3 is not designed for fluoride removal. If you're looking to remove fluoride from your water I'd recommend a reverse osmosis system. By HomePlus Water on Mar 15, 2024