UV Dynamics #400128 Lamp
UV Dynamics 400128 Replacement UV Lamp
Our Reg. Price: $
Sale Price: CAD$115.00
You save: $27.46!!
Write a review.
Found a Lower Price? We price match comparable systems!
Request a Price Beat
Guaranteed Genuine UV Dynamics 400128 Original Equipment Lamp. Don't be Fooled by Knock-Offs!
- Related Products
- Installation / Manual
We are pleased to offer a complete selection of replacement lamps for all UVDynamics ultraviolet (UV) sterilizers. All of our UV Dynamics replacement lamps ship with a replacement o-ring.
UV Dynamics #400128 replacement lamps are designed only for use in UV Dynamics UV sterilizers. We do not recommend that you attempt to use UV Dynamics replacement lamps in models made by other manufacturers.
All Genuine UV Dynamics Lamps have a blue base. Don't be fooled by knock-off lamps!
UV Dynamics #400128 is the replacement lamp for the following models:
- UV Dynamics UVD400
- UV Dynamics UVD400/S
- UV Dynamics UVD400E
- UV Dynamics MR400-TP Series
- UV Dynamics MR400E-TP Series
UV Dynamics #400128 Specifications
|Lamp Power||40 Watts|
|Lamp Life||12 Months|
How to change a UV Dynamics #400128 Lamp
Note: Do not touch the lamp or the quartz sleeve with your fingers. Handle by ends only or wear soft gloves.
- Unplug the system from the electrical outlet and turn off all water supplies to the unit.
- Carefully extract the lamp connector from the sleeve glandnut assembly to expose just the top of the lamp. While holding the lamp base firmly, remove the lamp power connector. Caution: lamp base can be very hot — be careful not to drop lamp into quartz sleeve as it easily broken.
- Carefully slide the UV lamp out of the quartz sleeve and discard according to local regulations.
- Install new lamp by reversing procedure described above.
- Slowly open water supply valve and purge air from system — verify that there are no leaks before reconnecting to AC power.
UV Dynamics 400128 Replacement UV Lamp Reviews
There are currently no reviews for this product.
Be the first to write a review.