SoftPlus Water Softeners Iron Rival Iron Reduction Systems ecoTAC Hard Water Conditioning Systems

Viqua Lamp & Sleeve Combo Kit for UVMax Model A - #602809-100

Trojan UVMax Lamp & Sleeve Combo - #602809-100

MSRP: CDN$210.00
Our Price: CDN$179.00
You save: $31.00

- or -
Make us an offer for the Trojan UVMax Lamp & Sleeve Combo - #602809-100

Write a review.

Found a Lower Price?
Request a Price Beat
Free Shipping on Lamp & Sleeve Combo - #602809-100
Lowest Price Guaranteed on the Trojan UVMax Lamp & Sleeve Combo - #602809-100

Lowest Price Guaranteed!

If you find a lower price on this product call us or Click here to request a price beat.

Guaranteed Genuine Trojan UVMax #602809-100 Lamp & Sleeve Combo. Don't be Fooled by Knock-Offs!

Trojan UVMax Lamp & Sleeve Combo - #602809-100

  • Description
  • Specifications
  • Related Products
  • Installation / Manual
  • Reviews
  • FAQ
  • Why Genuine

We are pleased to offer a complete selection of replacement lamps & sleeves for all Viqua / Sterilight ultraviolet (UV) sterilizers. Viqua / Sterilight replacement lamp & sleeve combo kits are designed only for use in Viqua / Sterilight UV sterilizers.

Trojan UVMax #602809-100 is the replacement lamp & sleeve combo for the following models:

  • Viqua UVMax Model A

Trojan UVMax #602809-100 Specifications

Technical Specifications
Part # #602809-100
Lamp Trojan UVMax #602803
Sleeve Trojan UVMax #602730
Lamp Length 12" (30cm)
Lamp Power 14 Watts
Lamp Life 12 Months

Replacement Sleeve

Replacement Sleeve <br>Part#:602730

MSRP: CDN$78.00
Our Price: CDN$61.00
You save: $17.00

- More Info -

Replacement Lamp

Replacement Lamp <br>Part#:602803

MSRP: CDN$169.00
Our Price: CDN$144.00
You save: $25.00

- More Info -

How to change a UVMax #602803 Lamp

  1. Turn off water supply valve to UV sterilizer
  2. Turn on faucet elsewhere in the home to depressurize the system
  3. Disconnect your UV system from power (unplug unit)
  4. Allow system to cool for 5 - 10 minutes
  5. Put on clean gloves
  6. Remove dust cover by squeezing and lifting up
  7. Lift lamp connector straight up
  8. Remove UVMax #602803 lamp from system by unscrewing and lifting straight up
  9. Insert new UVMax #602803 lamp into the system
  10. Screw new UVMax #602803 lamp into the system
  11. Push lamp connector down onto chamber
  12. Attach dust cover and slide over top of chamber
  13. Plug in UV system
  14. System will beep
  15. Hold reset button until system beeps and counter is reset to 365
  16. Slowly open water supply valve to UV sterilizer
  17. Check for leaks
  18. Close faucet elsewhere in the home
Note: The UVMax UVMax #602803 is a fluorescent lamp and can be recycled at most hardware stores or your local hazardous waste facility.

Trojan UVMax Lamp & Sleeve Combo - #602809-100 Reviews

There are currently no reviews for this product.
Be the first to write a review.

Trojan UVMax Lamp & Sleeve Combo - #602809-100 Customer Questions & Answers

No customer questions have been submitted for this. Have a question? Ask it above.

It is critical that only genuine Viqua brand original equipment lamps be used in your system. It has come to our attention that a number of Chinese manufacturers are making knock-off replica UV lamps. While they may physically fit in a Viqua system, they are NOT compatible. Testing of a wide range of these lamps has shown that many do not provide a safe UV dose or offer protection for the stated lamp life, and in some cases have even caused the failure of the ballast/controller and melting of the lamp harness.