Sterilight S950RL-4C Lamp

Sterilight S950RL-4C Lamp

MSRP: US$176.00
You save: $27.00!!

Choose Option:

(In Stock)
Lowest Price Guaranteed on the Sterilight S950RL-4C Lamp Make us an offer for the Sterilight S950RL-4C Lamp         Free Shipping on S950RL-4C Lamp

(0 Reviews)
Be the first to write a review.

Found a Lower Price? We price match comparable systems!
Request a Price Beat

Guaranteed Genuine Sterilight S950RL-4C Original Equipment Lamp. Don't be Fooled by Knock-Offs!

Sterilight S950RL-4C Lamp

  • Description
  • Specifications
  • Related Products
  • Installation / Manual
  • Reviews
  • Why Genuine

We are pleased to offer a complete selection of replacement lamps for all Sterilight ultraviolet (UV) sterilizers.

Sterilight S950RL-4C replacement lamps are designed only for use in Sterilight UV sterilizers. We do not recommend that you attempt to use Sterilight replacement lamps in models made by other manufacturers.

Sterilight S950RL-4C is the replacement lamp for the following models:

Sterilight S950RL-4C Specifications

Technical Specifications
Part # S950RL-4C
Max Flow 52 gpm
Lamp Power 100 Watts
Lamp Life 12 Months

Replacement Sleeve

Replacement Sleeve <br>Part#:QS-950

MSRP: US$115.00
Our Price: US$99.00
You save: $16

- More Info -

Replacement Sleeve

Replacement Sleeve <br>Part#:QSO-950

MSRP: US$112.00
Our Price: US$95.00
You save: $17

- More Info -

Replacement Lamp/Sleeve Combo

Replacement Lamp/Sleeve Combo<br>Part#:SHO950-QL

MSRP: US$235.00
Our Price: US$199.00
You save: $36

- More Info -

How to change a Sterilight S950RL-4C Lamp

  1. Turn off water supply valve to UV sterilizer
  2. Turn on faucet elsewhere in the home to depressurize the system
  3. Disconnect your UV system from power (unplug unit)
  4. Allow system to cool for 5 - 10 minutes
  5. Put on clean gloves
  6. Squeeze tabs on lamp connector and lift straight up
  7. Disconnect lamp connector from Sterilight S950RL-4C lamp
  8. Remove Sterilight S950RL-4C lamp from system
  9. Insert new Sterilight S950RL-4C lamp into the system
  10. Line up longest pin on lamp to shortest pin on lamp connector
  11. Once the Sterilight S950RL-4C lamp and lamp connector are attached slide assembly down towards chamber until you hear a click & it is attached
  12. Hold down reset button on side of power supply to reset day counter & plug in UV system
  13. Screen will display RSET
  14. Slowly open water supply valve to UV sterilizer
  15. Check for leaks
  16. Close faucet elsewhere in the home
Note: The Sterilight Sterilight S950RL-4C is a fluorescent lamp and can be recycled at most hardware stores or your local hazardous waste facility.

Sterilight S950RL-4C Lamp Reviews

There are currently no reviews for this product.
Be the first to write a review.
It is critical that only genuine Viqua brand original equipment lamps be used in your system. It has come to our attention that a number of Chinese manufacturers are making knock-off replica UV lamps. While they may physically fit in a Viqua system, they are NOT compatible. Testing of a wide range of these lamps has shown that many do not provide a safe UV dose or offer protection for the stated lamp life, and in some cases have even caused the failure of the ballast/controller and melting of the lamp harness.