Enpress CT-03-CB-AMINE Carbon Block Filter
for Chloramine Removal- 3 Micron
3 micron chloramine reduction carbon block filter for Enpress ONE Cartridge Tank systems
Enpress CT-03-CB-AMINE ONE Cartridge
Our Price: US$359.00
You save: $175.00
Write a review.
Found a Lower Price?
Request a Price Beat
Lowest Price Guaranteed!If you find a lower price on this product call us or Click here to request a price beat.
Alternative Part Numbers:
US Water 351-CT-03-CB-AMINE
US Water 351-CT-03-CB-AMINE
The Enpress CT-03-CB-AMINE incorporates a proprietary media with an enormous number of catalytically active nitrogen groups for highly efficient reduction of chloramines and general taste and odor improvement. This enhanced catalytic functionality has 5 times more capacity for chloramines reduction than standard carbon blocks. The The CT-03-CB-AMINE offers ease-of-use, extended service life, less frequent cartridge replacement, superior flow capacity, and low pressure loss.
The CT-03-CB-AMINE is ideal for whole house chloramine removal and general taste/odor improvement for homes on city water supplies. It is also popular for light commercial applications. Its large media volume provides far superior flow rate capacity and service life as compared to typical whole house catalytic carbon filters (4.5 x 10 Inch and 4.5 x 20 Inch "Big Blue" style cartridges). The CT-03-CB-AMINE provides nominal 3 micron filtration over a service life of >50,000 gallons (189,000 liters) with greater than 85% chloramine reduction at flow rates up to 7 gpm (26.5 LPM).
See the pressure drop vs. flow rate chart for expected pressure loss at various flow rates.
Each filter comes with top cap with built-in handle for lightweight and easy removal, a bag for proper sanitary disposal, and a double o-ring bottom seal to prevent filter bypass.
The Enpress CT-03-CB-AMINE cartridge is designed specifically for Enpress ONE Cartridge Tank filter systems with 1.25 inch inlet/outlet. The Enpress ONE Cartridge Tank is marketed under a variety of other brand names and part numbers, including: Watts SCT-125; US Filter Systems 350-ONE-CT-125; Hellenbrand 109710; and Nelsen NFS-HF. This cartridge is compatible with all of these systems that have a 1.25 inch inlet/outlet.
Features and Benefits:
- Catalytically activated media for superior chloramine removal
- Far superior flow rate and service life compared to traditional "Big Blue" style catalytic carbon filters
- Large surface area to promote high flow rates, low pressure loss, and reduced cartridge replacement frequency
- Double Buna-N o-ring seals to ensure no bypass of contaminants and high chemical compatibility
|Filter Type:||Carbon Block|
|Micron Rating:||3 Microns|
|Service Capacity:||>50,000 gallons at 85% reduction at 7 GPM flow rate|
|Max. Recommended Flow Rate:||7 GPM (26.5 LPM)|
|Carbon Type:||Catalytic Carbon w/ Polypropylene Outer Netting Wrap|
|End Cap Material:||Polypropylene|
|Max Pressure (Feed):||150 psi (<90 psi recommended)|