Whole House Iron, Manganese & Hydrogen Sulfide Filters

choose iron filterWe are pleased to offer a wide range of residential and light commercial water filters to remove iron, manganese, and hydrogen sulfide. Iron and manganese are responsible for most of the nuisance staining found in toilet bowls, on bathtubs, and in appliances such as dishwashers and washing machines. Iron typically causes yellow, orange, or red stains, whereas manganese generally causes brown or black stains. Hydrogen sulfide (H2S) is a dissolved gas that is often found in areas with elevated iron or manganese levels. It causes an objectionable rotten egg or sulfur odor.

Fortunately, the same treatment method can be used to treat all 3 of these contaminants - a combination of oxidation and filtration. Cartridge-based filters are an economical option for low flow rates and low levels of iron and hydrogen sulfide when favorable water conditions exist. Our backwashable Iron Rival Series filters are designed for more demanding applications where heavier contaminant loads or high water volumes could cause pre-mature cartridge filter clogging.

Choose a category:

WH5 Series
Cartridge-Based
Iron Filter Packages


Economical but highly effective cartridge-based filters for removal of low levels of iron and hydrogen sulfide. Recommended for iron levels less than 3 ppm (mg/l) where the pH is greater than 7.0. Popular choice for small homes, cabins, recreational properties and other low flow rate applications.


- More Info -
WH6 Series
Cartridge-Based Iron
Filter Packages w/ KDF-85 Media


Cartridge-based filters for removal of low levels of iron and hydrogen sulfide. Recommended for iron levels less than 2 ppm (mg/l) where the pH is 6.5 to 8.5. Popular choice for small homes, cabins, recreational properties and other low flow rate applications.


- More Info -
Iron Rival Series
Backwashable Iron, Manganese,
and Hydrogen Sulfide Filters


Choose from a wide variety of powerful chemical-free backwashable filters for all residential and light commercial iron, manganese, and hydrogen sulfide treatment applications. Recommended for iron levels up to 20ppm (mg/l), manganese up to 5 ppm, and hydrogen sulfide up to 10 ppm.


- More Info -