Viqua (Trojan) Lamp / Bulb for UVMax Model J, J+, K, K+, Pro 30, Pro 50 & Pro 24-186 - #602856

Viqua UVMax #602856 Replacement Lamp
for UVMax Model J, J+, K, K+, Pro 30, Pro 50

MSRP: US$335.00
US$255.00
You save: $80.00!!

Choose Option:



(In Stock)
Lowest Price Guaranteed on the Viqua UVMax #602856 Replacement Lamp<br>for UVMax Model J, J+, K, K+, Pro 30, Pro 50         Free Shipping on #602856 Replacement Lamp<br>for UVMax Model J, J+, K, K+, Pro 30, Pro 50
(0 Reviews)
Be the first to write a review.


Found a Lower Price?
Request a Price Beat

Guaranteed Genuine Trojan UVMax #602856 Original Equipment Lamp. Don't be Fooled by Knock-Offs!

Viqua UVMax #602856 Replacement Lamp<br>for UVMax Model J, J+, K, K+, Pro 30, Pro 50

  • Description
  • Specifications
  • Related Products
  • Installation / Manual
  • Reviews
  • Why Genuine

This is a genuine Viqua UVMax OEM replacement lamp and should be replaced every 12 months for optimal sterilization and safety.

Viqua (Trojan) UVMax #602856 replacement lamps are designed only for use in Viqua (Trojan) UVMax UV sterilizers. We do not recommend that you attempt to use Trojan replacement lamps in models made by other manufacturers.

UVMax #602856 is the replacement lamp for the following models:

UVMax #602856 Specifications

Technical Specifications
Part # #602856
Lamp Length 27" (68.5cm)
Lamp Power 200 Watts
Lamp Life 24 Months
GTIN 00724084028568
Replacement Sleeve <br>Part#:602976

Replacement Sleeve
Part#:602976

MSRP: US$87.00
Our Price: US$65.00
You save: $22


- More Info -
Lamp & Sleeve Combo <br>Part#:602850-103

Lamp & Sleeve Combo
Part#:602850-103

MSRP: US$369.00
Our Price: US$275.00
You save: $94


- More Info -

How to change a UVMax #602856 Lamp

  1. Turn off water supply valve to UV sterilizer
  2. Turn on faucet elsewhere in the home to depressurize the system
  3. Disconnect your UV system from power (unplug unit)
  4. Allow system to cool for 5 - 10 minutes
  5. Put on clean gloves
  6. Remove dust cover by squeezing and lifting up
  7. Lift lamp connector straight up
  8. Remove UVMax #602856 lamp from system by unscrewing and lifting straight up
  9. Insert new UVMax #602856 lamp into the system
  10. Screw new UVMax #602856 lamp into the system
  11. Push lamp connector down onto chamber
  12. Attach dust cover and slide over top of chamber
  13. Plug in UV system
  14. System will beep
  15. Hold reset button until system beeps and counter is reset to 365
  16. Slowly open water supply valve to UV sterilizer
  17. Check for leaks
  18. Close faucet elsewhere in the home
Note: The UVMax UVMax #602856 is a fluorescent lamp and can be recycled at most hardware stores or your local hazardous waste facility.

Viqua UVMax #602856 Replacement Lamp
for UVMax Model J, J+, K, K+, Pro 30, Pro 50 Reviews



There are currently no reviews for this product.
Be the first to write a review.
It is critical that only genuine Viqua brand original equipment lamps be used in your system. It has come to our attention that a number of Chinese manufacturers are making knock-off replica UV lamps. While they may physically fit in a Viqua system, they are NOT compatible. Testing of a wide range of these lamps has shown that many do not provide a safe UV dose or offer protection for the stated lamp life, and in some cases have even caused the failure of the ballast/controller and melting of the lamp harness.