Viqua (Trojan) Lamp / Bulb for UVMax Model H, H+ & Pro 20 - #602855

Viqua UVMax #602855 Replacement Lamp
for UVMax Model H, H+ & Pro 20

MSRP: US$285.00
US$209.00
You save: $76.00!!

Choose Option:



(In Stock)
Lowest Price Guaranteed on the Viqua UVMax #602855 Replacement Lamp<br>for UVMax Model H, H+ & Pro 20         Free Shipping on #602855 Replacement Lamp<br>for UVMax Model H, H+ & Pro 20
(0 Reviews)
Be the first to write a review.


Found a Lower Price?
Request a Price Beat

Guaranteed Genuine Trojan UVMax #602855 Original Equipment Lamp. Don't be Fooled by Knock-Offs!

Viqua UVMax #602855 Replacement Lamp<br>for UVMax Model H, H+ & Pro 20

  • Description
  • Specifications
  • Related Products
  • Installation / Manual
  • Reviews
  • Why Genuine

This is a genuine Viqua UVMax OEM replacement lamp and should be replaced every 12 months for optimal sterilization and safety.

Viqua (Trojan) UVMax #602855 replacement lamps are designed only for use in Viqua (Trojan) UVMax UV sterilizers. We do not recommend that you attempt to use Trojan replacement lamps in models made by other manufacturers.

UVMax #602855 is the replacement lamp for the following models:

UVMax #602855 Specifications

Technical Specifications
Part # #602855
Lamp Length 27" (68.5cm)
Lamp Power 140 Watts
Lamp Life 24 Months
GTIN 00724084028551
Replacement Sleeve <br>Part#:602975

Replacement Sleeve
Part#:602975

MSRP: US$79.00
Our Price: US$59.00
You save: $20


- More Info -
Lamp & Sleeve Combo <br>Part#:602850-102

Lamp & Sleeve Combo
Part#:602850-102

MSRP: US$312.00
Our Price: US$235.00
You save: $77


- More Info -

How to change a UVMax #602855 Lamp

  1. Turn off water supply valve to UV sterilizer
  2. Turn on faucet elsewhere in the home to depressurize the system
  3. Disconnect your UV system from power (unplug unit)
  4. Allow system to cool for 5 - 10 minutes
  5. Put on clean gloves
  6. Remove dust cover by squeezing and lifting up
  7. Lift lamp connector straight up
  8. Remove UVMax #602855 lamp from system by unscrewing and lifting straight up
  9. Insert new UVMax #602855 lamp into the system
  10. Screw new UVMax #602855 lamp into the system
  11. Push lamp connector down onto chamber
  12. Attach dust cover and slide over top of chamber
  13. Plug in UV system
  14. System will beep
  15. Hold reset button until system beeps and counter is reset to 365
  16. Slowly open water supply valve to UV sterilizer
  17. Check for leaks
  18. Close faucet elsewhere in the home
Note: The UVMax UVMax #602855 is a fluorescent lamp and can be recycled at most hardware stores or your local hazardous waste facility.

Viqua UVMax #602855 Replacement Lamp
for UVMax Model H, H+ & Pro 20 Reviews



There are currently no reviews for this product.
Be the first to write a review.
It is critical that only genuine Viqua brand original equipment lamps be used in your system. It has come to our attention that a number of Chinese manufacturers are making knock-off replica UV lamps. While they may physically fit in a Viqua system, they are NOT compatible. Testing of a wide range of these lamps has shown that many do not provide a safe UV dose or offer protection for the stated lamp life, and in some cases have even caused the failure of the ballast/controller and melting of the lamp harness.