Viqua / Sterilight S810-QL Lamp & Sleeve Combo

Viqua / Sterilight Lamp & Sleeve Combo - S810-QL

MSRP: US$149.00
Our Price: US$115.00
You save: $34.00

(In Stock)

(0 Reviews)
Be the first to write a review.

Found a Lower Price?
Request a Price Beat
Free Shipping on Lamp & Sleeve Combo - S810-QL

Lowest Price Guaranteed on the Viqua / Sterilight Lamp & Sleeve Combo - S810-QL

Guaranteed Genuine Viqua / Sterilight S810-QL Lamp & Sleeve Combo. Don't be Fooled by Knock-Offs!

Viqua / Sterilight Lamp & Sleeve Combo - S810-QL

  • Description
  • Specifications
  • Related Products
  • Installation / Manual
  • Reviews
  • Why Genuine

We are pleased to offer a complete selection of replacement lamps & sleeves for all Viqua / Sterilight ultraviolet (UV) sterilizers. Viqua / Sterilight replacement lamp & sleeve combo kits are designed only for use in Viqua / Sterilight UV sterilizers.

Sterilight S810-QL is the replacement lamp & sleeve combo for the following models:

Sterilight S810-QL Specifications

Technical Specifications
Part # #S810-QL
Lamp Sterilight / Viqua S810RL
Sleeve Sterilight / Viqua QS-810
Lamp Length 61 cm (31.9")
Lamp Power 37 Watts
Lamp Life 12 Months
Replacement Sleeve <br>Part#:QS-810

Replacement Sleeve

MSRP: US$49.00
Our Price: US$37.00
You save: $12

- More Info -
Replacement Lamp <br>Part#:S810RL

Replacement Lamp

MSRP: US$122.00
Our Price: US$89.00
You save: $33

- More Info -

How to change a Sterilight S810RL Lamp

  1. Turn off water supply valve to UV sterilizer
  2. Turn on faucet elsewhere in the home to depressurize the system
  3. Disconnect your UV system from power (unplug unit)
  4. Allow system to cool for 5 - 10 minutes
  5. Put on clean gloves
  6. Squeeze tabs on lamp connector and lift straight up
  7. Disconnect lamp connector from Sterilight S810RL lamp
  8. Remove Sterilight S810RL lamp from system
  9. Insert new Sterilight S810RL lamp into the system
  10. Line up longest pin on lamp to shortest pin on lamp connector
  11. Once the Sterilight S810RL lamp and lamp connector are attached slide assembly down towards chamber until you hear a click & it is attached
  12. Hold down reset button on side of power supply to reset day counter & plug in UV system
  13. Screen will display RSET
  14. Slowly open water supply valve to UV sterilizer
  15. Check for leaks
  16. Close faucet elsewhere in the home
Note: The Sterilight Sterilight S810RL is a fluorescent lamp and can be recycled at most hardware stores or your local hazardous waste facility.

Viqua / Sterilight Lamp & Sleeve Combo - S810-QL Reviews

There are currently no reviews for this product.
Be the first to write a review.
It is critical that only genuine Viqua brand original equipment lamps be used in your system. It has come to our attention that a number of Chinese manufacturers are making knock-off replica UV lamps. While they may physically fit in a Viqua system, they are NOT compatible. Testing of a wide range of these lamps has shown that many do not provide a safe UV dose or offer protection for the stated lamp life, and in some cases have even caused the failure of the ballast/controller and melting of the lamp harness.