Dow Filmtec TW30-2026
Reverse Osmosis (RO) Membrane

220 GPD light industrial / commercial / whole house replacement reverse osmosis (RO) membrane element

Specifications:
Membrane Type:Polyamide Thin-Film Composite (TFC)
Maximum Operating Temperature:113F (45C)
Maximum Operating Pressure:600 psi (41 bar)
Maximum Feed Flow Rate:5.0 gpm (1.1 m3/hr)
pH Range, Continuous Operation:2-11***
pH Range, Short-Term Cleaning:1-13* (30min)
Maximum Feed Silt Density Index:5 SDI
Free Chlorine Tolerance:< 0.1 ppm**
Permeate Flow Rate:220 GPD (0.83 m3/day)*
Stabilized Salt Rejection:99.5%

*Permeate flow rate and salt rejection based on the following test conditions: 2000 ppm NaCl, 225 psig (15.5 bar), 77F (25C), 5% recovery. Permeate flow rates for individual elements may vary +/-20%.

**Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure. Most RO systems have carbon pre-filters for this purpose.

***Maximum temperature for continuous operation above pH 10 is 95F (35C).

Filmtec TW30-2026 Reverse Osmosis (RO) Membrane

Dimensions:

   A: 26.0" (660mm)
   B: 1.18" (30mm)
   C: 0.68" (17mm)
   D: 1.8" (46mm)
Filmtec TW30-2026 Size Chart
Model Diameter Inches Length Inches Active Surface
Area ft2 (m2)
Test Pressure Permeate Flow
Capacity
GPD (m3/day)
Price
(w/ Free Shipping)
Filmtec TW30-2026
Our Stock #7030202600
Dow Part #80635
2 26 7 (0.7) 225 psi 220 (0.83)
Price: US$149.95

Notice: The use of this product in and of itself does not necessarily guarantee the removal of cysts and pathogens from water. Effective cyst and pathogen reduction is dependent on the complete system design and on the operation and maintenance of the system.