Dow Filmtec BW30-2540
Reverse Osmosis (RO) Membrane

850 GPD light industrial / commercial / whole house replacement reverse osmosis (RO) membrane element

Specifications:
Membrane Type:Polyamide Thin-Film Composite (TFC)
Maximum Operating Temperature:113F (45C)
Maximum Operating Pressure:600 psi (41 bar)
Maximum Feed Flow Rate:6 gpm (1.4 m3/hr)
pH Range, Continuous Operation:2-11***
pH Range, Short-Term Cleaning:1-13* (30min)
Maximum Feed Silt Density Index:5 SDI
Free Chlorine Tolerance:< 0.1 ppm**
Permeate Flow Rate:850 GPD (3.2 m3/day)*
Stabilized Salt Rejection:99.5%

*Permeate flow rate and salt rejection based on the following test conditions: 2000 ppm NaCl, 225 psig (15.5 bar), 77F (25C), 5% recovery. Permeate flow rates for individual elements may vary +/-20%.

**Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure. Most RO systems have carbon pre-filters for this purpose.

***Maximum temperature for continuous operation above pH 10 is 95F (35C).

Filmtec BW30-2540 Reverse Osmosis (RO) Membrane

Dimensions:

   A: 40.0" (1,016mm)
   B: 1.19" (30.2mm)
   C: 0.75" (19mm)
   D: 2.4" (61mm)
Filmtec BW30-2540 Size Chart
Model Diameter
Inches
Length
Inches
Active Surface
Area ft2 (m2)
Test
Pressure
Permeate Flow
Capacity
GPD (m3/day)
Price
(w/ Free Shipping)
Filmtec BW30-2540
Our Stock #7030254003
Dow Part #80766
2.5 40 28 (2.6) 225 psi 850 (3.2)
Price: US$217.95

Notice: The use of this product in and of itself does not necessarily guarantee the removal of cysts and pathogens from water. Effective cyst and pathogen reduction is dependent on the complete system design and on the operation and maintenance of the system.